One of the most potential reasons for which your Myle device might not be hitting is, as a result of the contacts at the bottom of its pod not making an excellent electrical connection with the contacts that are located at the top of its battery. If your device is not hitting for this mentioned reason, then you could sometimes have the problem resolved by simply pushing gently on your pod so you can have it seated more appropriately. If that step does not solve your problem, then you should try any or a combination of the following troubleshooting steps.
- Dip a cotton swab into alcohol and use it to gently rub the pins that are the top of your device’s battery. The alcohol will help greatly in seeing that any lint or dust that might be blocking the pins, is removed. It’s also quite possible that one among the pins has gotten stuck down from a former leak of e-liquid. If this happens to be the case, then the alcohol will still work to get the pin that has been stuck loosened.
- If the first step that you have been asked to take above doesn’t work, and you are able to see and verify that one of the pins at the top of your device is stuck down still, then you should try to use tweezers to have it gently pulled up. You can order these kinds of tweezers from any reliable vape store online.
- If the pins that are located at the top of your device appear to be fine, then you could also try using the tweezers to pull the contacts that are located at the bottom of the device’s pod down a bit. By having the metal bent, you’re able to force the contacts to push a bit more firmly onto the pins that are located at the top of your device. But, you should be quite careful to make sure that you do not get the contacts pulled off of the pod.
If all of the steps that have been listed above do not work, then it is most likely that you will need to have your device replaced.
What do you do if your device is not charging completely?
If your device is not charging at all, then the most probable reason is due to the charger and the battery not making an excellent electrical connection. You should check the metal contacts that are on the battery out and also check the charger to see whether any of the two has dust or lint on it. Get any contaminations removed by gently scraping with a toothpick, or by having the contact point rubbed with a cotton swab that has been dipped in alcohol.
In conclusion, your Myle Pod vaping device comes with a one-year warranty. If it ceases to function rightly – and you have tried all of the tips that have been offered in this article – then it is most likely that your device needs to be replaced. You can contact the producers for a new one within one year of buying it if, your device did not fail due to misuse or modifications.