Professional mag wheel repair Sydney will keep your wheels in a good condition. Cavernous potholes, careless driving and other perils are some of the enemies of mag wheels. Mag wheels are the most attractive thing on a lot of vehicles. If your alloy wheel take a knock, do not panic. Here is everything you need to know about fixing your mag wheel damage.
Repairing mag wheels
Your wheels will get damaged at one time. It is possible to fix light damages with an over-the-counter repair kit that comes with a filler, paint, primer and sandpaper. You may want to apply lacquer, depending on the finish of your wheel. This type of repair kit demands a combination of luck and patience on your part as the user. When preparing your wheel properly, it is important to be patient. You should also ensure that you paint the wheel without causing your paint to run. It is also important to ensure that the paint color matches the wheel.
Steps for fixing your wheel
You should first start by cleaning your wheels thoroughly. This will remove grease and dirt. Washing up liquid will do well. The next step is to use sandpaper to remove any damaged paint from the wheel and flatten chips. If there is dust on your wheel, wipe it away.
You should then mix the putty and fill in any damaged areas. A mag wheel repair specialist must ensure that the surface is level. Let it set and once it has fully dried, you can use sandpaper to sand the filler and let it flush. You should understand that this step takes a lot of time and you have to be patient.
Wipe away any dust using a damp cloth and apply masking tape around the area. carefully apply the primer and allow it to dry. You should apply light coats of the paint and wait for the paint to dry between coats. You need to ensure you are happy with the finish. If you have a kit that contains lacquer, apply it now. Then you will need to apply a light coating and give it some time to dry. However, if your repair kit does not have lacquer then you should buy it separately.
Know when to call a professional
While most simple repairs can be done with a repair kit, you should know when to call a professional. If the damage is more serious such as extensive kerbing, bent wheel, fractures and corrosion, it will pay off when you call a professional to fix it. It will cost you around 50 pounds per wheel. The benefit is that when you call a professional, they will do the work at your place and can finish the work on the same day. This means that you will not be inconvenienced.
If you have a premium car or anything more serious then you should outsource professional mag wheel repair Sydney services. A professional will ensure that your wheels look new.