Doing a mag wheel repair Sydney New South Wales is not a difficult thing to do. You can get a mag wheel repair kit and do it on your own. Repair kits contain the materials needed to fix a damaged mag wheel. This will contain paint, a filler, and other tools such as brushes and sandpapers. The kits can be used to fix medium to light damages such as shallow scratches around the edges of your mag wheels. But they are not suitable for fixing large damaged areas. You can get repair kits at cheaper prices than professional repair services. However, if the damage is large, you might need to hire a professional to do the repair job for you.
How the repair kit works
Mag wheel repair kits fill the damage to even the surface. They can then be used to repaint the area. The kits contain paint, filler, sandpaper, gloves, lacquer and application tools. You have several sandpapers to choose from including rough sandpaper and fine grain sandpaper. If you want to get a smooth surface, you should use fine-grain sandpaper. Before you purchase the kit, it is important to check the paint colour and ensure it matches. Some repair kits come in a wide selection of colours so it is important to choose the colour that is closest to your alloys.
Tips for use
If the damage is not serious, you can repair your mag wheel without hiring a mag wheel repair specialist. However, if the damage is serious, you should call a specialist to do the work for you. You should start by cleaning the wheel using a washing liquid. Remove all grease and dirt before you go to the next step.
Now sand down the damaged area and remove any protruding areas. No part of the mag should be sticking up. You should use fine sandpaper to sand over the area again to smooth it out. Then wipe away the dust using a damp cloth and let it dry out.
Now you should fill in the damaged area. If you are using filler putty, just mix a small amount and press it into the holes. Massage it to smooth out any lumps. You need to get it as level as possible with the surrounding area. If you are using filler spray, make sure you spray it into the damaged area. Allow the filler to set between your applications. Deeper damages can take several applications.
Allow the filler to set completely and use fine sandpaper to smooth out the filler. You need the finish to be as good as it can be so you should take your time. Now wipe down the area using a damp cloth to get rid of any dust and let it dry. Mask off the area before you paint and finalise the mag wheel repair Sydney New South Wales. Apply the paint in thin layers and allow it to dry between coats. Allow the paint to dry and apply lacquer if your wheel contains it.